On Trend ATC Bookcase

Hello this is Yolie sharing my version of the ATC Bookcase. The Bookcase a good size for crafty storage. The assembled measurements are 6-5/8" wide x 6-7/8" deep x 7-7/8" tall with a roomy drawer measuring (2-7/8" tall).

For starters, always remember to use a lightly damp cloth to clean off the laser cut soot on all the pieces. I went with a super trendy paper pad to alter the ATC Bookcase. The complete supply list is at the bottom of this post.

I used acrylic paint to paint all the edges of the ATC Bookcase. I separated the drawer pieces from the actual pieces that make up the book case. It also helps to determine which pattern paper to use.

I traced and cut the pattern paper and adhered them to the pieces. I sprayed the Mod Podge Ultra Matte onto the backside of the paper. This made it so easy!
I used Beacon Power-Tac on the tabs to assemble and also to attached the drawer knob.

Here are a couple of side angle photos.

I also covered the side of the drawers for a more finished look.

It's so pretty! I can't wait to fill it up with craft goodies.

Thank you for stopping by today and happy crafting.

Supply List: 
ATC Bookcase No. C56L
Mod Podge Ultra Matte
Acrylic Paints
12x12 pattern paper
Paint brush
Beacon Power-Tac
Westcott Scissors
Paint brush
Knob
Rhinestones
Pencil

Decorative Screen

Hello and welcome, this is Yolie with today's project. I used the Decorative Screen and Wood Medallions set. Inspired by the colors of an embossing powder meant for mixed media, Midnight Magic. You will see the embossing powder in the photos below, but first let's get started with the Decorative Screen.

First, with a damp paper towel I cleaned off the soot residue left behind by the laser cutter. Then I took the blue acrylic paint and I applied one coat to each panel and allowed to dry.

Applying the next three colors were the same technique; apply the paint with a dry brush sporadically, before it dried, I removed some of the paint with a paper towel. The paint colors are listed below.

I purchased 3/4" x 11/16" hinges from my local hardware store. I painted the hinges first with black chalk paint. Using a toothpick, I applied Power-Tac adhesive to the backside of the hinges. After the glue dried, I lightly painted them with brown acrylic paint for rust look.

So here is the color inspiration. It's from a mixed media heavy embossing powder made by Emerald Creek for Rita Barakat. It is called Midnight Magic and get this, it glows in the dark.
I applied a heavy coat of embossing ink and dusted the Wood Medallions with the embossing powder.

Here are the acrylic paints used. What do you think? Did I match up the colors to coordinate with the embossing powder?

Here is my Decorative Screen, it stands at 8" and is 15" width. It's gorgeous!

It folds nicely enough for storage.

Inspiration is everywhere! Look, get inspired and create!
I hope you enjoyed my tutorial and the final results. Enjoy your week and keep it crafty.

Supply List:
Decorative Screen No. D21F
Wood Medallions  No. D106E
Plaid Crafts paints: Look At Me Blue, Melted Chocolate, Midnight, Black Chalk Paint
Rita Barakat Midnight Magic Embossing Powder by Emerald Creek
Beacon Power-Tac adhesive
Hinges
Paint brushes
Heat Gun
Versamark Embossing Ink
Paper towels

Woodland Fairy Crown

Hello this is Yolie with my first Gypsy Soul Laser Cuts project. Today I am sharing my version of a woodland Fairy crown using GSLC's Crown.

I prepared the Crown pieces with Golden Gesso and allowed to dry.

Next, I generously added White Crackle Texture Paste. Lots of peeks and valleys as I wanted large crackles and smaller ones too. The thick peeks will result larger crackles while the thinner valleys smaller. Allow to dry, no heat gun. It took about 45 minutes to completely dry.

While I waited for the Crackle Paste to dry, I prepared the intricate scroll piece with Copper Kettle Metallic Lustre. I applied it carefully as to not bend any of the scrolls. Once it dried, I took a cotton cloth to polish.

Now that the Crackle Paste dried, I used Alfalfa acrylic paint. I covered the piece completely and before it dried, I took a paper towel to remove the paint allowing paint into the cracks.

Here I used Dark Brown with a bit of black to cool the color. Using the same method mentioned above, I painted just a few spots and then quickly removed the paint with a paper towel.

Finally, I embellished the crown with gems, pearls, stones, flowers, crystals, gold glass glitter and flowers. I adhered the embellishments with a hot glue and Heavy Body Gel.

Here's a closeup of the gorgeous flowers sprinkled with gold glass glitter.

Thank you for visiting today and I hope you enjoyed my version of a Woodland Fairy Crown.

Supply List:
Gypsy Soul Laser Cut Crown Item H2CR1
Gesso White
Texture Paste White Crackle
Acrylic Paints, Alfalfa, Dark Brown, Black
Metallic Lustre Copper Kettle
Flowers
Gems
Glass Glitter
Hot Glue
Heavy Body Gel
Paint brushes
Spatula

Merry and Bright Lantern

Hi Everyone,
Jess here today with a Christmas Lantern.

I have to admit I had one idea for this lantern and it turned into something completely different.
I started by assembling the lantern, just to be sure I was doing it correctly and so I would know what I would need to paint.

I disassembled it and started painting.

This is a really heavy duty chipboard and paint doesn't absorb into it like it does with thinner chipboard.  I did not put down a layer of gesso. I just went right in with a thin layer of black acrylic paint.  The entire piece was covered.  Once the black was dry I stippled on metallics.  I used bronze, gold, and silver.
To decorate the top I used the snowflake border from the Winter Shape Set.  Two snowflakes fit perfectly on each side of the top.  The snowflakes got a quick coat of silver paint.I wanted to add glitter, but didn't want to deal with using glue to make the snowflakes tacky. I decided to run them through my Xyron sticker maker on the painted side.  I added a clear glitter and had very little mess.
The snowflakes were glued to the top.

Here's where I changed my mind.  I decided I wanted to make this look like an actual lantern and not a winter scene inside the lantern like I had originally planned.  I took plain tissue paper and Tim Holtz's Frosted Film to line the inside of the panels.  Vellum would work too, but I like the frosted film because it gives an icy look and feel.  I did not attach the one side that isn't notched so you can add a flameless candle inside to make it look like a real lantern.

Grit paste with glitter sprinkled on top made the snow on the lantern.  The top was covered with grit paste and my pieces were stuck in while it was still wet.

The front of the lantern has a holiday wreath and the sentiment.

Thankful Frame

Hi Everyone,
Jess here today with a super fun and easy Fall decor project.  This project uses two different frames from Gypsy Soul the Flourished Open Circle Frame(Medium) and the Round Grapevine Frame(coming to the store soon).

Cover your frames in Emerald Creek Embossing powder in Charred Gold.

 Line the back of the large frame with paper.  I used Distress Crayons to age the paper .  Glue on your paper doll and give her some pops of color using Distress Markers.

The vintage flowers were dyed using Distress Spray Stain and bundled with ribbon.  Glue on paper flowers,leaves, and sentiment.

  Flick metallic and black paint all over the piece.  And just like that you're done!

A perfect little hostess gift. 

Enjoy! 

Jess