GSL Cuts: glass glitter

Monday, January 14, 2019

Woodland Fairy Crown

Hello this is Yolie with my first Gypsy Soul Laser Cuts project. Today I am sharing my version of a woodland Fairy crown using GSLC's Crown.

I prepared the Crown pieces with Golden Gesso and allowed to dry.

Next, I generously added White Crackle Texture Paste. Lots of peeks and valleys as I wanted large crackles and smaller ones too. The thick peeks will result larger crackles while the thinner valleys smaller. Allow to dry, no heat gun. It took about 45 minutes to completely dry.

While I waited for the Crackle Paste to dry, I prepared the intricate scroll piece with Copper Kettle Metallic Lustre. I applied it carefully as to not bend any of the scrolls. Once it dried, I took a cotton cloth to polish.

Now that the Crackle Paste dried, I used Alfalfa acrylic paint. I covered the piece completely and before it dried, I took a paper towel to remove the paint allowing paint into the cracks.

Here I used Dark Brown with a bit of black to cool the color. Using the same method mentioned above, I painted just a few spots and then quickly removed the paint with a paper towel.

Finally, I embellished the crown with gems, pearls, stones, flowers, crystals, gold glass glitter and flowers. I adhered the embellishments with a hot glue and Heavy Body Gel.

Here's a closeup of the gorgeous flowers sprinkled with gold glass glitter.

Thank you for visiting today and I hope you enjoyed my version of a Woodland Fairy Crown.

Supply List:
Gypsy Soul Laser Cut Crown Item H2CR1
Gesso White
Texture Paste White Crackle
Acrylic Paints, Alfalfa, Dark Brown, Black
Metallic Lustre Copper Kettle
Flowers
Gems
Glass Glitter
Hot Glue
Heavy Body Gel
Paint brushes
Spatula

Friday, September 22, 2017

Grunge Phone Holder with Alicia Barry

Today I thought I would take the opportunity to experiment a little and try something different from what I normally do. I decided to create this phone holder for my son. For this I had to abandon the traditional "pretty" style I am used to and go with something a bit more grungy and industrial.

I began with the Gypsy Soul Laser Cuts phone/tablet holder. It comes in three pieces which easily slot together giving a very sturdy base.

I covered my piece in black gesso. I also used a Gypsy Soul Laser Cuts Steampunk border piece and a rectangular frame called Mikayla which will be coming soon to the store

I wanted the frame to be the backboard for the phone when in place. I also wanted it to stand out from the other black chipboard pieces, so I opted instead for more of a rust effect. To achieve this, I applied layers of red and orange Silks paint (sparingly), then swiped some copper 3D stamp paint with my finger and heat set. I then added some Metallic Melts embossing powders. I found the heat setting between layers really enhanced the look by helping to blend my colors together.

Meanwhile I applied some patterned paper to the back of the phone holder, and embellished the front panel with a ruler sticker, and some circular sticker pieces. I painted my Steampunk Border piece in black gesso, and cut into three smaller sections, with one going on the front panel as shown.

I also applied some black crackle paint to the visible sections of the base.

I cut a journaling tag from patterned paper and adhered to the back of the frame with foam dots before adhering to the back panel of the holder.

I then added my remaining Steampunk Border pieces to either side of the frame, and added some additional metal embellishments in behind. Black glass glitter was also applied in various spots across the project for extra dimension.