A nostalgia image of summer is kids splashing in a open fire hydrant or a lawn sprinkler. Growing up in the country I had my own summer fun as a creek was just across the road from our family homestead. We would spend our summer days building dams, looking for crayfish, or making our way to our favorite swimming holes. The homestead was sold last year and the renovations to the old home are bringing new life into the estate. My parents grew up in the Depression era and were frugal with their belongings. We were upcycling before it was trendy. It is these memories and hopes for the new owners that inspire this artwork.
1. Gather Supplies
2. Use a Thick Plastic Spatula to Randomly Paint GSLC Propellers with Lumiere Metallic Rust, Metallic Copper, and True Gold Paints. This Unconventional Tool can be Used in a Spreading Motion or in a Dabbing Motion Depending on your Desired Effect.
3. While Pint is Still Wet Sprinkle with Cosmic Shimmer Gilding Flakes.
4. Secure Gilding Flakes Into Place Using Matte Gel Medium.
5. Spray with Aqua Net Hairspray and Sprinkle with Chili Powder and Nutmeg.
6. Seal in Place by Spraying with Aqua Net Hairspray.
7. Use Matte Gel Medium to Adhere Seth Apter WOW Embossing Powders-Crusty Copper, Weathered Gold and Etched Platinum to GSLC Gears Shape Set.
8. Cure with a Heating Tool.
9. Add a bit of Metallic Copper Paint to the Finished Gears Using the large Plastic Spatula.
10. Paint the GSLC Hardware Silhouettes with Shades of Green, Blue, and Pink Acrylic Paints with a Large Bristle Paintbrush.
11. Use Same Paintbrush to add Tiny Flicks of Metallic Copper and Neon Pink to These Pieces.
12. Use These Same Steps to Color the GSLC Waterworks Shape Set.
13. Allow All GSLC Chippies to Dry Fully and Flat.
14. Use Large Plastic Spatula to Upcycle a Christmas Wall Plaque-Waste Not Want Not- I Dabbed with These Texture Pastes-Red Oxide, Russian Mud, Deep Brown. Allow to Dry Fully
15. Add Blue Acrylic Paints to Cosmic Shimmer Lava Paste and Randomly Dab onto Wall Plaque. Cure with Heat Tool.
16. Cut Strips of Leather from an Upcycled Vintage Pocketbook aka. Purse.
17. Punch Holes into Leather Strips and Attach to Wall Plaque Using an Awl to Start the Holes for the Microscrew. Securing with Your Screwdriver.
18. Preview and Plan the Design of Assemblage.
19. Use Heavy Matte Gel Medium to Secure Your Pieces. Allowing to Dry Fully Flat and Weighted Down.
20. Braid Three Different Shades Of Deerskin Lace.
21. Put Through Plaque Opening and Tidy up ends of the Leather Lace Wrapping With Thick Thread.
Some Final Thoughts.
I like unexpected finds, the treasure troughs found in junk shops, a swimming hole just off the long county dirt road, a roadside orchard or farmers market, a county fair full of concession stands stand and all their naughty pleasures-funnel cakes, corn dogs, kettle corn, bloomin' onions, Italian Sausages, cactus taters-ribbon fries, whoopie pies, shoofly pie, pierogies, and birch beer. May we all take the time to safe a tossed out treasure, to dip our toes in the cool water of a mountain stream, to take a road less traveled and to constantly choose gratitude over grumbling.
Supplies: Gypsy Soul Laser Cuts-Waterworks Shape Set, Gypsy Soul Laser Cuts-Gears Shape Set, Gypsy Soul Laser Cuts-Propellers, Upcycled Christmas Wall Plaque, Metallic Paints-I Used Lumiere Metallic Rust, Metallic Copper, and True Gold, Large Plastic Spatula, Cosmic Shimmer Gilding Flakes, Matte Gel Medium, Chili Powder, Nutmeg, Aqua Net Hairspray, Seth Apter WOW Embossing Powders-Crusty Copper, Weathered Gold, Etched Platinum, Heat Tool, Acrylic Paints-Green, Blue, Pink Tones, Paintbrush, Upcycled Leather from Vintage Purse, Texture Paste-Red Oxide, Russian Mud, Deep Brown, Cosmic Shimmer Lava Paste, Blue Acrylic Paints, Micro Screws, Screwdriver, Awl, Heavy Gel Matte Medium, Leather Deerskin Lace, Thick Thread
I cannot wait to see your interpretation of this project. Share it on the Gypsy Soul Laser Cuts Craft Group Page on Facebook. I would love to see what new creations you are working on!
No comments:
Post a Comment