The house that snark built

This is the house that snark built.  

It's a bittersweet day for me today.  After three years with the Gypsy Soul Laser Cuts team today will be my last post.  I have loved every second I have been on the team and promise I won't be gone forever.  So, for this post I decided to go out the way I came in- full of snark.  

This project was made with the House Oddities box.  This kit includes the box and all the little houses inside.  It's pretty amazing.  

I started with two sheets of watercolor paper and used Distress Oxide Sprays to color them.  The first sheet has Broken China, Wilted Violet, Pumice Stone, and Cracked Pistachio Oxides.  After the initial layer of Oxides I added some PaperArtsy Infusions in Rocky Road. I areas that were still exposed got hit with Distress Ink in the corresponding colors.  

The second sheet was made using Picked Raspberry, Peacock Feathers, and Squeezed Lemonade Oxide Sprays.  I added Infusions in Violeta and filled in the blanks with Distress Ink.

The houses are hinged together using plain white sports tape.  I cut a small piece and put it on the front of the house.  A second piece went on the back so there was no stick exposed tape.  I knew I wasn't going to make the pages too thick with embellishments.  If you want to recreate this house and know you will have chunky pages just make the hinges longer.  The hinges are painted with colors that correspond to the pages.  

I cut the watercolor paper to fit each house and then stamped up the backgrounds.  I used several of Tim Holtz Stampers Anonymous sets (CMS364, CMS341, CMS328,CMS302, CMS294,CMS261, CMS187, CMS172,CMS083, and CMS081) for this.  Some of the backgrounds were stamped using Archival ink in Hydrangea and the rest were stamped using Staz-on Pigment inks.  

Part of the stamping was done before the embellishments were added.  After the paperdolls, sentiments, and other bits were glued down I added a bit more stamping. 

Once all the stamping was done I went back in with various gel pens to add doodles and scribbles.  

So this is what the front row of houses looks like all stretched out.  

You can see I added bits to some of the pages.  The little crown, chain, party hats, and coin add just a bit of bulk but I took that into account when making the hinges. 

 Here are the back pages of the house. 

 Now these could be the front.  It just depends on how you fold them up. 

 I had so much fun picking out the paperdolls and the snarky sentiments for each. 

The exterior is quite simple to put together. 

I painted the exterior black and the interior with Dina Wakley's Lime.  Once it was all dry I used Beacon 3 in 1 glue to stick it all together.  Don't glue the front to the box or you won't be able to get inside! I gave the exterior a spritz of gold ink spray just so it wasn't flat black.

 The interior was splattered with the same color paints I used to color the hinges in the book. You can see the little houses all fit right inside the box.  

You can hinge the door to the houses, so when you pull the door open all the houses come right out.  I decided to do mine a bit differently and I actually used Tim Holtz hinges to hinge the door to the box.  The door panels were covered using the same background paper that covers the houses inside. 

Here you can see the top of the box was stuck to the door using a layer of foam tape.  The door is hinged to the side of the box using the metal hinges.  I used an awl and then was able to use brads to attach the hinges.  Please pardon my hand in here, the wooden base I use to take my photos is a bit warped so sometimes projects want to fall over.  

The final touches were added by spraying the finials with Oxide sprays in Peacock Feathers and Cracked Pistachio.  They got splattered with the paint too.  The baseboard doll was edged with gold(and the entire backside is painted gold too).  He got his snarky sentiment and was glued to the box using super glue.  

I hope you enjoyed my project today.  I had so much fun making it! 

Happy Crafting,

Jess

She has butterflies in her stomach

Hi Guys,
Jess here today.

I recently got this cool Art Doll Nicho(coming to the store soon) from GSL and immediately thought I needed to put butterflies in it.


The doll comes in three pieces. I started by cutting a dress out of a bright bold patterned paper and glued it to the main body piece. Then I was stumped.  I realized I don't do bright often.  So I tore that dress off and went with a more neutral paper (read grungy).  Once I did that she really started to come together.  The paper was splattered with Black Soot Distress Paint.  The edges were inked up using Distress Ink in Pumice Stone.  The gold is Dina Wakley Gilt(this is quickly becoming my go to gold color).

 The large butterflies on her dress are from the Tim Holtz French Flight stamp and die set.   I cut them using mop up paper I had on my desk.  The tiny key centers are from Ideaology.

  The large wings were die cut using the Fanciful Flight Die using the same mop up paper I used to cut the small butterflies.

Her arms are from the Santos Doll.  They are painted with Dina Wakley Gilt.  Then stamped using the Blank Page Muse Correspondence Script stamp in Black Soot Archival ink.   I used craft thread to make the joints and attached them to the body using a strong glue.

The second piece of the doll is the head.  It's really just a circle that you can use to support the head of your choice.  I had this art doll sheet from Art Chix Studios and used one of them.  I gave her a halo using the Medallion Impresslit.  Some teeny butterflies finish her halo.  I wanted to give her a little necklace since the doll head has a long neck.  I used some chain from the Tim Holtz Assemblage line to make her necklace and the pearl dangle. The butterfly is a another one from the French Flight set.

  The last piece is the little belly box that needs to be folded up.  The box is tiny.  Use a good strong glue to keep it together.  I painted the inside using Peeled Paint Distress Paint and added a flowery paper to the back.  The butterflies were cut using the Tim Holtz Butterfly Frenzy die.  I spritzed several colors of Distress Oxide ink on my gel press and used a piece of vintage book paper to pull my print.  Once the paper was dry I ran it through the Vagabond.  The butterflies were glued down to fill the cavity.  There are a couple teeny butterfly brads in her belly too.

The legs are vintage ceramic doll legs.  I poked holes into the belly box and ran craft thread though to keep them on the box.  They are tied on so they can dangle and move.

I hope you like her! 

Jess

steampunk spinner - ink pad storage

Hi everyone, today I am super excited to share my new distress oxide ink storage solution. I have been searching for a way to keep my inks organized and readily available while I am creating. Up to this point, they have been stacked along the back edge of my drafting table. This was a handy location, yet each time I wanted a specific color, I would have to unstack and re-stack all of the inks... needless to say, it was quite a task and, often resulted in a tumbling tower of ink pads. I noticed that Gypsy Soul Laser Cuts was making ink storage solutions for different brands of ink and mentioned the idea for Distress (square) ink pad storage. Wow, am I ever happy that I did!

The Gypsy Soul Laser Cuts Square Ink Pad Storage (12 inks) is sold in sets that accommodate 12 ink pads. Four of those sets can be combined to create a tower, and with the addition of the Square Ink Pad Storage Base and Bin Add-on, the tower is raised off the surface with a base and spinner and the top becomes a bin for additional storage. There is also a kit (coming soon) that will add four sections of three additional slots. This can be placed atop the 12 slot pieces and thus accommodate the full Distress Ink or Distress Oxide palette. For this project I have used four Square Ink Pad Storage units as well as the Add-on. I am looking forward to adding the additional set so that I am able to store my full ink pad collection all together. 

To begin, I first paint all of the pieces with black spray paint. I choose spray paint because of the large number of pieces and I also thought that it would give a nice finish for the ink pads to slide in and out of their slots. The sturdy chipboard does not require painting; I wanted it to match some of the elements in my studio.

Next, I set about constructing the four basic storage "towers". A quick dry glue works great for this step. I begin with the back piece (the one with all of the slots) flat on my table and apply a thin line of glue to the edges of each "shelf." I then slip the shelf piece into the corresponding slot.

 Every shelf is inserted before I attach a side. When the side is in place and all shelf tabs are locked in, I attach the opposite side. The pieces fit securely and I did not even need to use any clamps to hold it together. Once the back, sides and shelves have dried, I attach the top and bottom pieces to each "tower".

Repeat this process four times for each storage "tower." When all of the tall rectangular storage towers are assembled, they are placed side by side, rotating each a quarter turn to form a tall "cube". 

Once they are each facing the correct direction, you can use glue to secure the sides that are adjacent to each other. This will further stabilize the unit. The storage base and bin add-on contains a square chipboard piece that will be adhered to the bottom of the unit and this is also where the spinner is attached. I used a strong adhesive to attach the spinner to the center of the base and set it aside to dry completely before attaching the combined piece to the base of the "tower cube". 

Beside each column of ink storage is a blank space, I thought it would be fun to make pieces of art for each of these sections. I create the artwork using my inks, stamps, and stencils. When I am creating, I want to be able to quickly find the ink colors I am searching for. To make it easier to know which colors are located on each side, I ink the background for that particular side with the colors that will be located in that column. 

For example, if I am looking for one of my green ink pads, I can spin the unit to the side that has a background consisting primarily of green and then I will easily be able to find the color green I am looking for. As you can see in the following photos, each artwork represents the colors that are located on that side of the cube. The spinner at the base make it easy to turn the unit until I have located my desired color palette.

Next, I assemble the bin for the top of the unit. This is a simple task of inserting the tabs into their corresponding slots with adhesive. The bin pieces can be painted before or after it is assembled. I chose to paint it first. I also created a strip of inked paper to coordinate with the inks that I will store in the bin until the 4 smaller sections are available. I stamped and stenciled this strip in a similar style and design to the ones that are located on the cube. 

I am so excited to have my inks organized in an easy to use storage solution that can be altered in any way that suits my fancy. I love the look of the steampunk designs; however, if I ever want to change it up, all I need to do is create some more strips of art and adhere them over the steampunk ones. 

If you have been searching for a storage solution for those square ink pads that is economical and can match any decor, I hope you will consider the Gypsy Soul Laser Cuts Square Ink Pad Storage (12 Inks) 

Thank you so much for stopping by today!

~Ann

Gypsy Soul Laser Cuts Used:

Square Ink Pad Storage Base and Bin Add-on

Square Ink Pad Storage (12 Inks)

Spring Cleaning

Hi Everyone,
Jess here today.

Well it's time to do some spring cleaning and that includes my desk.  I try to be a neat crafter, but my desk always ends up looking like a large bomb exploded in the general vicinity.  For today's project I used only items that were on my desk or within reach of my desk.  I will admit some of these are mop up tags, so I don't know exactly what is on there.

Adventure is out there tag-

The butterfly man background was made using Vintage Photo Oxide Spray and then I added Hickory Smoke ink through a stencil(THS091).  I shifted the stencil and added Peeled Paint Oxide Ink.  I splatted on some Black Soot Distress Paint and then stamped the flourish(CMS070) in  Ground Espresso Archival Ink.  The edges got a bit of Vintage Photo Distress Crayon for shadow.

The paper doll was inked up using Tsukineko Inks.  His buttons and watch chain were colored using gel pens.  Then got a pair of wings and  glued them to the tag.  I had a snippet of the mini provincial impresslit left so I popped that in the top corner.  Chic chat words were inked up using Peacock Feathers Distress Ink and glued down.

A snippet of the Meadow Flowers was on my desk so I added a couple layers of gesso and once that was dry I added PaperArtsy Infusions in The Sage to the stems.  I added grit paste to the flowers and used Peacock Feathers Distress Ink to color them.  There was some leftover Distress Crayon on my desk from edging the tag and I used that to dirty up the flowers.  Once that was glued down, I added detail using gel pens.

Eccentric, but very estimable gentleman-

For the eccentric, but very estimable gentleman tag I used a mop up tag that had some blues and purples on it.  I added some leftover rust from when I was rusting up bits and some Seth Apter Stamps.
The circles are from the Mixed Media Fragments 1 Small.  I rusted them using PaperArtsy's Rusting Powder and then added Verday Paint from 10 Second Studios for the oxidized brass bits.  I cut the circles into three segments and attached them to the card using glue.  I added Tim Holtz Hardware heads to make them appear to be bolted down. I added alcohol ink in Patina, Mushroom, and Coffee to the hardware heads.  Then I popped on a bit of Distress Crayon in Cracked Pistachio for a bit more dimension.

I tied a little brass heart to his wrist and glued him down.

 Clipping stickers make for really fun stories and gel pens add the final bits to this tag.

The Proprietor of Ideas-

This little guy gets stuck in all kind of things.  Today I popped him in a lightbulb from the Steampunk Lightbulb Set.  The lightbulb was painted white and then the bulb portion was given a layer of DecoArt Crackle Glaze.  Once the glaze was dry I added Distress Crayon in Black Soot and Brushed Pewter.  A thin piece of acetate was added behind the bulb and colored with mushroom alcohol ink.  The tiny crown on his head will be coming soon to the GSL cuts store(I cannot wait for you to see all of these teeny crowns).

The base of the bulb was painted with Tarnished Brass Distress Paint and then pounced with Mushroom, Latte, and Coffee Alcohol Inks. I snuck in another hardware head here and a story stick.

This tag was made by using Oxide Spray on my gel plate.  It makes such gorgeous and dreamy backgrounds.  I used a Tim stencil for the words and numbers.  I used Hickory Smoke and Black Soot Distress Ink for the coloring.  White paint is splattered all over the back, Perfect Pearl spray, and gel pens finish the background.

The main title is from the Tim Holtz Noble Gent set.  That was stamped in Black Soot Archival.  The little halo around the bulb is the same set.  I used Dina Wakley Paint in Ancient and Gilt to stamp out the halo.  Be sure to clean paint off your rubber stamps right away!   

Do you save all of your little bits to make projects with later or do you toss out the scraps?

Jess

Spring toadstool fairy exploding canvas

Hi Everyone,
Jess here today.  The weather has been so nice here.  Flowers are blooming and pretty soon we will start seeing the baby ducks in our little neighborhood lake.  It's also the time of year when I start to make fairies.  Ah, who am I kidding I love to make fairies all year round!

A couple years back I made an exploding canvas and I totally loved the process.  I decided it was time to make a new one and this time I gave it a little twist.  I knew I wanted a tiny fairy so my canvas had to be small  too.
I started by covering a 5x5 canvas with Tim Holtz Collage paper.  I used collage medium to adhere it to the canvas and coated the top too.  I dried it with a heat gun.  Once the collage paper was dry I used texture paste and a flower stencil to add detail to the top and bottom corners.

I sprayed the canvas using Distress Oxide Spray in Peeled Paint, Vintage Photo, and Iced Spruce.

 I added paint splatter in black(Distress Black Soot) and gold(Dina Wakley Ancient).   I used Distress Crayon in Lucky Clover to enhance the texture paste flowers. At the end I decided to add a bit of Worn lipstick and Picked Raspberry Crayon to the flowers too. 

Once the paint was dry I flipped the canvas over and used a different collage paper to line the inside of the canvas.  I blasted it with the heat gun and then cut the canvas up.  You can see the cut lines.  This is the scariest part of the whole process, but the outcome is fabulous.  

Before I started prepping my canvas I took the Mini Shadowbox set and put together a couple of the boxes I thought might fit into the frame.  Once I had one that fit right I started working on the canvas.  I didn't want to get this far into the thing just to discover that what I thought it would look like in my head would not work out at all. 

After the canvas was cut I glued the pieces to the front of the canvas creating an opening.  

For the hollow, I wound up using the smallest of the shadowboxes.  The fun thing about the box this size is that it doesn't take much paper to cover it.  I spritzed a manila tag with Worn Lipstick Oxide Spray and let it air dry.  The air drying seems to make it oxidize a bit better(it also could be my imagination).I gave it a quick mist of water on either side and ran it through my 3d Kaleidoscope  embossing folder.  This one tag covered the entire outside of my box with some to spare! I sanded the tag a bit and added some Distress Crayon in Gathered Twigs to highlight the raised areas.  

For an added detail I ran metal plumbing tape through my impresslit folder.I colored it using gold, latte, and caramel alcohol inks.   

I cut the manila tag to cover the outside of the shadowbox I used the faux dresden to cover the edges.  The edge of the dresden is the perfect size to cover the edge of the chipboard. 

The inside of the box was lined with paper and washi tape.  I really just wanted the little flowers to peep through in the back there.  I added some spun cotton toadstools, moss, and a teeny paperdoll.  The new Tim Holtz  wings work perfectly on this guy.  

To finish the canvas I colored seam binding using the Worn Lipstick Oxide spray and a bit of Tea Dye Distress Spray.  I made a fluffy bow and added a word band. In the top corner, opposite from the bow, I added a flower cluster with some additional moss.    

Happy Spring! 

Jess