Hi everyone! Barbara here today on the
Gypsy Soul Laser Cuts blog, and this month, we are cross-promoting with
Canvas Corp, and look at all the goodies they sent.
And I thought these products would make a fantastic sewing-themed mini book. Apologies in advance as this is a very photo heavy, long post, but I hope you enjoy it.
So, I am using the
Gypsy Soul Laser Cuts Art Journal as my base. As you can see, there are lots of chipboard pages to use, never mind how many sheets of double-sided paper you may or may not choose to add. The possibilities are endless.
I pulled threads and frayed two edges (top and left in the photo below) to find the "square" edge so that I could use the book to measure where to cut the canvas (the bottom edge in the photo below). Lay the covers on your canvas, one at a time, aligning the side with the holes along the selvage edge (right side in photo below) of the canvas.
Cut the canvas along the bottom edge, leaving approximately 1/4" edge to fray. I like to pull a thread to get a straight line to cut along.
Lay book covers onto Gypsy Seamstress Collection: Spools paper and trace around them, as shown.
Glue the canvas pieces to the outside of each cover.
Then glue the print papers to the inside front and back covers.
I had enough canvas material left, so while I was at it, I cut two more pieces the same size to add as canvas pages. I used my crop-a-dile tool to punch holes and add eyelets to strengthen the holes.
Cut 8 sheets of the French General print paper measuring 5" x 7" for the inside chipboard pages. These papers are all double sided, so you will have more choices as to which side or sides to use.
Cover both sides of chipboard pages, as shown below. (TIP: Use chipboard to mark binding holes and punch or cut out holes before covering each page. I used a 3/8" hole punch I had in my stash).
Cut 8 sheets of the French General paper measuring 6" x 7-1/4" for the inside tabbed chipboard pages.
Cover both sides of each tabbed chipboard page and trim away excess paper, as shown below.
Cut 4 sheets of the French General paper measuring 1-5/8" x 7-1/4" for the inside book mark chipboard pages.
Cover both sides of each chipboard bookmark and trim away excess paper, as shown below.
Cut 4 more sheets of the French General paper measuring 5" x 7" for the back side only of the corrugated chipboard pages.
Cover only the smooth side of each corrugated chipboard page, as shown below.
The pretty red and blue ticking pieces from Canvas Corp matched my papers perfectly, and so I wanted to cut and fray the edges of each color to make additional fabric pages for my art-journal-turned-mini-album. I punched holes and added eyelets to each page the same as I did for my canvas pages. I found a couple of pieces of ephemera in the French General collection and stitched them to each page, as shown.
You can make pockets to any size you wish to fit onto your page(s), whether larger or smaller. The measurements I used for my pocket, shown below, are 4"H x 6"W. The top was punched with a decorative edge punch. The remaining sides and bottom were scored 1/2" in on each side, folded, and corners were mitered for a clean corner.
I added score-tape along the folded edges, as shown, and then these can be added to any page you chose. Just adjust your measurements for whatever size you want or need, such as journaling cards or other ephemera you want to store.
Use packaging from 7Gypsies Architectures Treasures, and trace around frame with pencil. Cut out middle section and glue to back of frame.
Glue framed piece to front cover.
Computer generate a title for your book to fit onto one of the
Stackable Labels Shape Set labels. I chose "Needles and Pins" for my title. Glue to top piece of label and distress with brown ink. Heat emboss bottom piece of label with Charred Gold embossing powder. Glue both together and glue to front cover. (See photo of finished cover)
Heat emboss stand portion of dress form with Weathered Wood embossing powder.
(TIP: I added brown archival ink over the embossing to give it a deeper brown color). Cover body portion with self adhesive print fabric from the French General collection. This will be glued to front cover (see photo of finished cover).
Heat emboss stand portion of dress form with Charred Gold embossing powder. Cover body portion with self adhesive print fabric from the French General collection. Set aside for use on inside pages.
Heat emboss stand portion of dress form with Hammered Metal embossing powder. Cover body portion with self adhesive print fabric from the French General collection. Set aside for use on inside pages.
On the back of a tag, use the Architextures Parchment Rub-On -
Inspire to add the quote and whatever image you like. This is just one example of many I used throughout the book. They are really fun and easy to use, and they add a real vintage feel to your project.
Supplies Used:
GSL
Art Journal
GSL
Stackable Labels Shape Set
GSL
Dressforms 2 Shape Set
GSL
Flourished Frame Karen
Canvas Corp
Natural canvas fabric
Ivory burlap fabric
Ticking fabric (red, blue)
Colored Burlap (aqua, ivory)
7Gypsies 12x12 paper - Gypsy Seamstress Collection:
Spools
7Gypsies 12x12 paper - Gypsy Seamstress Collection:
Buttons
7Gypsies Architecture Treasures -
Vintage Sewing Machine
7Gypsies Architecture Treasures -
Old Scissors
7Gypsies Architxtures Junque Pack -
Library
7Gypsies Architextures Parchment Rub-On -
Inspire
French General paper collection (Jolee's Boutique by EK Success)
French General embellishments and ephemera
Floral edge punch (Martha Stewart)
Buttons punch (EK Success)
Scor-tape (or any adhesive you have on hand)
Embossing Powders (Emerald Creek)
Lace, metal embellishments, gem stickers, etc. (from my stash)
If you are reading this, then I thank you for sticking with me. I will continue to work in this book, adding to and decorating each page, which is the most enjoyable part for me. I don't like to rush this part, but I enjoy the "hunt" for more items to add.
As always, thanks so much for stopping by, and have wonderful, creative day!
Barbara
SaveSave
