Steampunk'd Dressform Hang Up

Hello and happy Thursday!  Barbara here again with another project using these fabulous Dressform Hang Ups from Gypsy Soul Laser Cuts.  If you recall, last week I shared a Shabby Chic Dressform Hang Ups.  Click here to see that post.  This week, I am going all out in Steampunk style.

Step 1:  Paint Dressform Hang Up with Titan Buff, then rust, and dry brush with burnt umber.  Glue hanger piece on top of dress form hanger to create dimension.

Step 2:  Trace bodice onto jeweled paper, cut out and adhere to Dressform Hang Up.

Step 3:  Use chipboard piece removed from Dressform Hang Up  trace and cut out embossed faux leather paper, adhere to piece.

Step 4:  Place faux leather piece over corset, trace lower edge and remove.

Step 5:  Once removed, cut corset apart, as shown.  Save bottom piece for another project.

Step 6:  Paint corset with Paynes Grey, dab with Translucent Yellow Oxide, and cover with Titanium White antiquing cream.  Remove some of the antiquing cream with damp baby wipe to give the appearance of a patinated metal.  Thread 22g copper wire through holes in corset.

Step 7:  Glue corset to bodice, then glue faux leather belt on top, as shown.

Step 8:  Cut patterned paper to 7" x 12".  Spritz with water and gently crumple the paper until soft.  Carefully tear up the center and roll the edges.  Very gently shape the paper and dry with heat tool.  It will become very stiff and hold its shape.

Step 9:  To make the underskirt, cut a piece of coordinating patterned paper to fit the opening.  Also trim a piece from the Texture Sheets Gears and paint with white gesso.

Step 10:  Paint Texture Sheets Gears with Paynes Grey, dab with Translucent Yellow Oxide, and cover with Titanium White antiquing cream.  Remove some of the antiquing cream with damp baby wipe to give the appearance of a patinated metal.  

Step 11:  Glue gears and print paper beneath the opening in the skirt.  Cut apart a few more individual gears from the Texture Sheets Gears,  color with antique gold paste wax, and adhere randomly over the bottom texture sheet, as shown.

Step 12:  Glue skirt to bodice, as shown.  Use a good, tacky glue and place a heavy object over it until the glue dries.

Step 13:  Cut chain link in half, add gold metallic ink and heat emboss with gold embossing powder. Adhere to skirt in a crisscross manner.  Add a metal charm and metal studs, as shown.

Step 14:  Add one individual gear that is colored with antique gold wax to the hanger, as shown.  

Gypsy Soul Laser Cuts Supplies used:
Dressform Hang Ups
Texture Sheets Gears
Chain Borders
Parisian Shape Set (corset)

Other supplies used:
12x12 scrapbook paper pad
Jeweled paper
Acrylic paint: Paynes Grey, Raw Sienna, Burnt Umber, Translucent Yellow Oxide, Rusty
Titanium White Antiquing Cream 
Gold Metallic ink pad
Antique Gold wax paste
Gold embossing powder
Metal jewelry embellishment

I have to tell you that I am having a blast making these!  I can see many uses for them, as I said before.  And you are not limited to making the skirts from paper.  How about scraps of fabric, netting,  tulle, ribbon, and so on.  And think of the embellishing possibilities.  You are limited only by your imagination!  So stop by Gypsy Soul Laser Cuts to see the wonderful selection of intricately cut chipboard you could use to make these your own!

Thanks for stopping by, and have a wonderful weekend!

Barbara

Amazing - Mixed Media Layout by Lynne

Hi there and greetings from beautiful (but cold) British Columbia! I'm here visiting my dad who hasn't been all that well and just before I left home, I created this tribute page with a photo of Dad taken by his best friend last year and lots of Gina's chipboard goodies!

I started with a corrugated background and added some sand paste for texture. The chipboard and metal pieces were painted grey like the background and then attached to it. I added layers of mist and a bit of spattered acrylic paint as well as a little random stamping.



Don't toss the punch-out negative pieces that come with texture sheets like the Brick wall: they make awesome embellishments as well! The brick pieces were covered with silver texture paste then lightly rubbed with black ink.

 

I love this chain piece and added some extra tan mist to make it stand out; I wasn't especially careful about getting mist on the edges of the photo because I thought it would add to the grungy and masculine feel (although I did mask the center of the photo)

I used several of Gina's gears as well as a couple metal ones and clustered them along with a Tim Holtz compass piece which was left unpainted for contrast.

Thanks for visiting-stay warm and have yourself a wonderful week!

Gina's Items Used

Gears shape Set

Brick Wall

Mixed Media Fragments 1

Chain Borders

Miniatures shape set-guy thing

Chevron Words

Other Items Used

Tim Holtz metal arrow, gears and compass

Prima clock

Mister Hueys, Heidi Swapp, Perfect Pearls and Tattered Angels Mists

Two Thought Provoking Cards

Hello everyone!  Barbara here, and I am in a card making mood.  It might be because I have several birthdays on the horizon, and I am in dire need of masculine cards.  My first card is made with the male recipient in mind, while the second card could go either way just by changing the bicycle.  

As you know, we have been featuring papers and embellishments from The Robin's Nest this month.  I love the quality of their products, and I know you will, too.

Directions:

Clockworks Penny Farthing Card

Cover front of 5"x7" kraft card with the brown herringbone print from the Regent Street paper pad.



Cut Graphic 45 paper to 5"x7", distress edges.  Tear a "V" from the top, large enough to fit a gear behind the opening.  Distress edges with paper distressor tool, edge with Vintage Photo distress stain. The stain gives the edges a burnt look.  Mist corners with water and curl around the end of a paint brush.  Let dry.

Stamp sentiment (One Penny for Your Thoughts) onto a fussy cut printed label from the Steampunk Botanica pad with black archival ink.

The Clockworks Penny Farthing was inked with Vintage Photo and Black Soot Distress stains.  The two gears were inked first with Vintage Photo distress stain, then Tarnished Brass and Antique Bronze distress stains.

I could not resist adding a spinner to the center of the Penny Farthing (below). I love the two-toned effect on the chipboard from the two distress stain colors.

In this photo, you can see the gold gear that I slipped behind the torn away paper, and on top, I added the second gear with another tiny spinner.

Before adhering the stamped label with foam dots, I heated a section of film strip to "wrinkle" it.

My next card could be either feminine or masculine, just by changing the bicycle to a boy's bike.

Life is a Beautiful Ride Card

Cover front of 5"x7" kraft card with The Robin's Nest Saffron Honey paper.  Distress the edges with Vintage Photo distress ink.



Use the reverse side of the Saffron Honey paper to punch a decorative strip and adhere along left edge of card.



Use a Versamark pen to color the bike, and heat emboss with Glacier embossing powder.  The tires were heat embossed with Midnight Black embossing powder, while the pedal, handlebar, and seat were heat embossed with Black Puffs embossing powder.



A tiny pieceof olive green paper was glued behind the basket section, while two larger metal gears were glued to the wheels.  A tiny watch part was glued above the pedal.

I cut apart one of the chipboard pieces from the Mixed Media Fragments 2 set and colored the arrow with Vintage Photo distress stain, then dabbed the Peeled Paint Distress Paint randomly over the top.

The other section I cut away from the Mixed Media Fragments 2 set were colored with the Peeled Paint Distress Paint and adhered to the card, as shown.

I cut apart a piece of the chain border and colored with Antique Bronze distress stain. Then I dabbed the chain randomly with a Versamark pen, and heat embossed with the Glacier embossing powder to give it a patina.

I used Big Chat Stickers and Label Letters to form the sentiment "life is a beautiful ride".

Supplies:

Gina's Designs:

Clockwork Penny Farthing

Steampunk Shape Set

Chain Borders

Mixed Media Fragments 2

Bicycles

The Robin's Nest:  Saffron Honey

Rubber Stamp: One Penny 4 (PaperArtsy)

Kraft 5"x7" pre-folded card stock

Versamark Ink Pen

Black archival ink

Embossing Powders: Glacier (Zing), Black Puffs (Ranger), Midnight Black (Mark Enterprises)

Distress Stains: Vintage Photo, Black Soot, Antique Bronze, Tarnished Brass

Distress Paint: Peeled Paint

Paper:  Steampunk Botanica, Regent Street (Recollections)

Decorative punch (Martha Stewart)

Tim Holtz Ideaology: Film Strip, Spinners, Brads, Label Letters, Big Chat Stickers

Watch parts, metal gears (my stash)

Prismacolor Metallic Silver pen

I hope you enjoyed my cards today and are inspired to make some with chipboard shapes in mind.

Please check out the links to The Robin's Nest Store and Blog.  Don't forget to visit Gina's Store, Blog, and Facebook Group so you will always be privy to all the wonderful happenings  



Thanks for stopping by, and have a wonderful, creative week!!!



Barbara

  

My Friendship Bus Layout

Hi there-Lynne here with a layout that's dear to my heart. I found this picture on Facebook and it is so very ME that I just had to use it for a page:

I'm pretty introverted and have a very small circle of friends who mean the world to me, so this layout sums it all up.

I used Stampendous Aged Copper embossing powder on the chain and the gears, dry-embossed the little car, then painted it and rubbed it with black ink, and I painted the hearts and title letters, then embossed them with UTEE.

Thanks so much for stopping by; whether your circle of friends would fit on a "short bus" like this one or you'd need a Greyhound bus, cherish every one of them for they're one of the greatest blessings in life! Hugs!

Gina's Items Used

Texture Sheet gears

Chain Borders

Miniatures Shape Set-Guy Thing

Steampunk Hearts

Build a Layout-Love Birds



Other Items Used

Stampendous Embossing powder-Aged Copper

BoBunny Somewhere In Time papers

Memory Box stencil-harlequins

Prima Stencil-static

UTEE

Altered Frame by Nancy

Nancy is up today with an altered frame that features a variety chipboard shapes.  This frame began as a particle board unfinished frame. I crackle painted it and added the chippie embellishments.  The frame is being donated to an auction for a dear friend to help with some veterinary costs.  To bid on this frame please visit the facebook page. The frame measures 12 x  12 inches and holds a 5 x 7 photo, or a smaller photo with a mat.

Supplies Used:

Chain Borders

Birdwatching Shape Set

Flourishes 2

Grass & Foliage

Ornamental Birdcages Shape Set

Chicken Wire Large

For The Birds