Halloween Cats Scratching At The Window

 Hi Everyone, 

I have a spooky Halloween project for you today!

I am using two chipboard sets - Cat Shape Set D69B  and Dimensional Window Kit D174WD.

The Dimensional Window Kit comes with the four pieces shown below (two window frames, a mylar square and the back piece) but I am only using the two frames today and will find another use for the remaining pieces.

The cat shape set has six cat shapes and I will be using four of them for this project.

Here's my idea for the spooky window, showing the placement of the four cats.

First things first, let's paint the cats black because we can't have Halloween without some black cats!  I used black fluid acrylic paint to paint mine but any black paint will do.

Next I painted the frames.  I couldn't decide which colour to choose so I decided to paint one lime green and one purple, using metallic acrylic paints.

So the usual way of constructing this dimensional window is to use it to make a shaker style window and stack one frame on top of the other to make a deeper frame.  The way I am using this dimensional window is a little different.  :)

Here are some gel prints I made on deli paper a while ago.  They were not made for Halloween but they have the perfect Halloween colours so I wanted to use a piece of it in my window.  

I cut a square to fit my frame.  If you don't happen to have Halloween-coloured gel prints to hand, you can of course use any other paper, so long as there is some transparency to it ie deli paper, tissue paper, tracing paper, layout paper etc.  You can then paint or ink on it or leave it plain.

Next glue the deli paper square to the unpainted side of one of the frames, in my case, the green one.  Then repeat the process to sandwich the deli paper between the two frames but first add a little cord or ribbon in the middle which will allow you to hang it up later.

Once you have your frame complete and dried, add two of the cats to one side...

... and two of the cats to the other side, so that all four window panes have a cat in them.

Here is the finished project.  It looks cute don't you think?  Just two cute little cats playing in the window...

But if you hang it up in front of a window...

...the light shines through the deli paper and you can see their spooky little friends on the other side of the window, just waiting to come in!

I hope you enjoyed this little Halloween project and that you will try making your own spooky Halloween cat window!

Til next time,

Elle

Empire of the Cat


Project Recipe:

Cat Shape Set D69B  and Dimensional Window Kit D174WD.
black fluid acrylic paint
lime green and purple metallic acrylic paint
PVA glue
From stash:  gel printed deli paper (you can use any paper you can see through) paper cord (you can use any type of cord or ribbon)

Altered Christmas Window

Hello! Cherry here at the Gypsy Soul Laser Cuts Blog.

I have a fun altered Christmas window to share.

I started by tracing my chosen paper onto the Dimensional Window Kit

.

 I then cut the window with my paper cutter to get a nice straight line and than adhered with paper and lightly sanded the edges.

 I then covered my back window with my other pattern paper and then layered both pieces together.

 From there I wrapped my ribbons around the window and adhered my embellishments to each window pane.

Here it is finished.

Thanks for visiting the GSLC blog, Cherry

GSLC Supplies-

Dimensional Window Kit

Windows On The Boardwalk With Susan

Hello crafty folks!  It's Susan from Killam Creative with a little nostalgia for warm-weather days gone by.

Sometimes I'm lucky enough that a base object instantly inspires.  Gypsy Soul Laser Cuts' Dimensional Window Kit and Seaside Decor did exactly that, allowing me to create four different scenes for this fantastic G45 paper.

The Dimensional Window Kit is made of 5 separate parts: 3 duplicate window layers, a solid back, and a cellophane window to fit between the layers of your choice.  I didn't end up using the cello sheet but will save it for another project.

I started out gesso-ing the window front panel and all the seaside pieces.  I chose to leave the seaside pieces in their original frame in the hopes I wouldn't cover up too much of the yummy laser-burned shadow on the sides.  In hindsight, it also helped speed up the process since I didn't need to handle small fiddly bits.  You'll see further on how I handled excess gesso on the sides.

Next I picked the paper to cover the front frame, flipped it over and outlined the windows and outer edge with pencil.  I used a finger blade to cut along the lines and turned it over.  The next step was to take that paper and decide which scenes to put in each window.

As you might guess, I changed my mind on the blue wave paper and went with a darker one, below.  I glued it to the front window panel and allowed to dry.  Then I sanded the edges down with fine and superfine sandpaper.  Brown ink went all over the edges to give it an aged feel.  

To preserve the shadow effect *and* fill in spots I touched with the white gesso, I used a brown marker on and around the edges.  Yes, I'm that picky.  ::grin::

Time to work on the Seaside Decor bits!  This was all kinds of experimentation.  Haha!  To create texture on the waves I painted slightly-watered-down molding paste.  After it dried I painted a couple shades of blue.

The umbrella got a multi-color treatment.  It's vintage-y!  I glued sand to the starfish and sand dollar by smearing them in the medium then sprinkling a lot of sand on them.  Once they dried I was able to gently rub the edges to clean off excess glue and sand.  Not pictured is a peachy coat of paint on the 3rd shell.

The next two photos show the pieces I've cut out and edge-inked with brown.  I wanted to take advantage of all the Dimensional Window Kit layers so I started planning out where to put them.  

Before anything was attached, I added hanging hardware to the back.

In these panels, I glued the inside layers and laid out the top layer.  From left to right, Dad's first layer and the boy's only layer are attached, as well as the first wave layer in the lower right.  The second panel has the postcard stamp and the second wave layer.  

Here all the inside layering bits are glued in and I wanted to assemble the Dimensional Window Kit.  I used more of the matte medium and a lot of clamps to dry overnight. Next day it was time to attach all the fun pieces to the top layer!  

Here you can see the layering completed.  I also added the cut-out Coney Island sign to give that window pane a little more dimension. 

Thanks so much for visiting today!  Each day you'll find new Gypsy Soul Laser Cuts inspiration projects here on the blog.  Happy crafting!

Cheers,
Susan

Gypsy Soul Laser Cuts Used
Dimensional Window Kit #D174WD
Seaside Decor #C40B

Other Supplies Used
Graphic 45 "On The Boardwalk" paper
Tim Holtz Distressed Ink Pad & Pen in Gathered Twig and Ground Espresso
Helmar Scrap Dots dimensional glue under dad and son
Zig blue pen glue
Ranger Glue & Seal Matte Medium
Golden Molding Paste diluted with a little water
Acrylic paint - Liquitex, Golden, craft, gesso