Grunge Phone Holder with Alicia Barry

Today I thought I would take the opportunity to experiment a little and try something different from what I normally do. I decided to create this phone holder for my son. For this I had to abandon the traditional "pretty" style I am used to and go with something a bit more grungy and industrial.

I began with the Gypsy Soul Laser Cuts phone/tablet holder. It comes in three pieces which easily slot together giving a very sturdy base.

I covered my piece in black gesso. I also used a Gypsy Soul Laser Cuts Steampunk border piece and a  rectangular frame called Mikayla which will be coming soon to the store

I wanted the frame to be the backboard for the phone when in place. I also wanted it to stand out from the other black chipboard pieces,  so I opted instead for more of a rust effect. To achieve this, I applied layers of red and orange Silks paint (sparingly), then swiped some copper 3D stamp paint with my finger and heat set. I then added some Metallic Melts embossing powders. I found the heat setting between layers really enhanced the look by helping to blend my colors together. 

Meanwhile I applied some patterned paper to the back of the phone holder, and embellished the front panel with a ruler sticker, and some circular sticker pieces. I painted my Steampunk Border piece in black gesso, and cut into three smaller sections, with one going on the front panel as shown.

I also applied some black crackle paint to the visible sections of the base. 

I cut a journaling tag from patterned paper and adhered to the back of the frame with foam dots before adhering to the back panel of the holder. 

I then added my remaining Steampunk Border pieces to either side of the frame, and added some additional metal embellishments in behind. Black glass glitter was also applied in various spots across the project for extra dimension. 

Here you can see how the embellishments frame the phone while in use. The phone will also securely sit sideways to expose the charging port. 

Gypsy Soul Laser Cut supplies used:

Gypsy Soul Laser Cuts Phone Holder

Gypsy Soul Laser Cuts Steampunk Border

Gypsy Soul Laser Cuts Rectangular Frame, Mikayla (coming soon)

Other Supplies:

Kaisercraft Story Book paper collection and stickers

Metallic Melts embossing powders

Dina Wakley Media Black Gesso

Ranger crackle paint

Finnabair glass glitter

Silks paint: Ginger peach and Spicy tomato

3D stamp paint: Copper

Foam Dots

Metal embellishments and buttons

Save

Steampunk Hot Air Balloon Embellishment by Kim C.

Hi everyone!  This week I wanted to show what great embellishments you can make with items from Gina's Designs!!

We are also having a cross promotion with The Robin's Nest this month!

I used the Steampunk Border for this embellishment.

I cut off the hot air balloon from the bottom and this is what I created with it!!

I first gave it a couple coats of gesso.  I then painted it with paints from ColourArt. Next, some pattern paper from my stash was added.

I added some dew drops from The Robin's Nest on the balloon as well as the bottom gear. Crackle medium was added to the top of the balloon in all the little openings.

This is now ready to add to any project, like a card, tag, or maybe even a layout.  I will be using this at a later time in an upcoming project.  Or maybe I just might put a magnet on the back and hang it up.  This would make a great magnet for the fridge, hmmm....

Gina's Items Used:

Steampunk Border

The Robin's Nest Item Used:

Dew Drops

Other items used:

Graphic 45 Steampunk Debutante

Crackle Accents

ColourArte Paints

Thanks for stopping!!

Kim :)