Travel journal (part IV)

Hi everyone!

Myry again and let's finish our journal!

We're going to do the closing. You need a piece of fabric, a piece of thin cardboard (2x20cm in my case but you can make it longer and wider if you want) and a piece of scrap paper

Mark the center of the cardboard and round one of the corners

Cover the cardboard with the piece of scrap paper

Copy the shape of the carboard on a piece of thin paper...

...and stick it to the piece of fabric, cut the fabric around the paper

Now is the time to decorate the piece of fabric. Instead of sewing as on the cover I decided to use some strips of gold cardsotck

Stick the fabric to the piece of cardboard

Sew (or stick) the corner without rounding to the cover

Put the round corner where you want to place the buckle for the closure

Mark the place where you're going to put the buckle

Use another piece of thin cardboard (2x5'5cm in my case) and another piece of fabric

I've sewn it at 5mm from the edge making sure that there is space for the closure strip to enter without problems, and to cover the seam I also used a gold strips

You can make a closure with two ribbons if it's easier for you!

Behind the front and back cover stick 2 scrap papers (the size of your covers) and make pockets using 2 pieces of lace, fabric...

Stick them once you've sewn everything you want to the covers, you can also decorate the edges of the structure with more gold cardstock

It's always better to decorate the spine before sticking the structure but with this type of spines it can be done at any time. First find the center of the spine and make a hole at the height you prefer

Use another piece of thin cardboard (1'5x4cm in my case) and another piece of fabric

Once it's dry fold it by less than half and sew the top piece leaving the bottom one open

Put a brad on top and put it in the hole in the spine. You can cover the brad legs with a piece of paper or an embellishment. Now you can go through the open space any hanging decoration

And now we're going to do the decoration of the cover. Use the "Portal Frame" to make a shaker window. Paint it with blue and brown paint to give it a rusty touch

Cut a piece of round cardboard the same size as the round part of the chipboard

Paint it the same colors, especially the inner and outer edges

Put gold eyelets in the holes of the chipboard

Cut a round piece of scrap paper and glue it under the round cardboard. Stick all the elements you want and put the shaker filler. 

Stick a round piece of acetate on top to close the window...

...and before sticking the chipboard on top you must stick more elements (if you want)

As the closure strip is higher than the cover itself, use cardboard so that the shaker is straight

Once it's dry decorate the shaker with the rest of the elements such as sand, shells...

And so we finish this tutorial!!

Thank you so much for joining me here!!! It has been a very interesting year, working with these great chipboards and be with this fantastic DT. Please, be aware with everything that is published on the blog and on the FB group. 

Thanks a lot for reading to the end.

I wish you a good summer!!!!

Myry says goodbye for a while!!

Gypsy Soul Laser Cuts items used:

Portal Frame

Trading Coin Covers Under The Sea

Compass

Ring Stains

Wander Title

Other items used:

Old book cover

Blue stained papers

Scrapbook papers or something else

Brown and gold cardstock, and acetate

2 different fabrics and sewing machine

Die cuts, shaker filler and some embellishments

Natural elements: shells, sand, branches...

Carboard, cutter, scissors, glue, gold eyelets and brads

Brown, cream, blue and crystal effect acrylic paint, blue and purple crayons and gold glitter

Gesso, brush, sponge, scoreboard and crop-a-dile