Top Menu

Wednesday, December 11, 2019

Gentle Snows

Hard to imagine how quickly seasons change from one to another and we find ourselves in the season of stillness and waiting. Although truth be told, the holiday season for most is far from that with the hustle and bustle of all the to-do lists it sometime difficult to find solace in this season. This is the inspiration for this project I’ve created what I liked to see looking out my drafty cold ancient wooden windows.
1.                   Take apart  Gypsy Soul Laser Cuts Double Window Ornate [D32C]
2.                   Paint Back Portion with Golden Interference Blue Fine Acrylic Paint. Use several layers to get the full effect and flash of color.
3.                   Use Versa Mark Pad and Oil Rubbed Bronze and Walnut Stain Embossing Powders to cover the front portion of the frame. Cure with a heating tool. Repeat until you have the desired effect.
4.                   Print your graphics and text, using a vintage parchment paper adds an aged look to your images easily.
5.                   Use a pencil to trace the image you’d like showing through your window frame.
6.                   Cut and secure to frame using Weldbond.
7.                   Next carefully add the front portion of your GSLC Ornate frame to the back portion.
    8.                   Allow to dry flat using clamps or pressing tool of       your choosing. I’ve used plastic bags filled with kitty
      litter, a basket filled with coins, or a stack of heavy
      books.
9.                   While it is drying prepare your wooden embossed substrate. I used a Tim Holtz Sizzix Lumber #D Texture Fades Embossing Folder and acrylic paints to give mine an aged panel appeal.
10.              Glue a piece of pale blue metallic cardstock to the prepared wooden panel.
11.              Trace  Gypsy Soul Laser Cuts Stained Glass Frame Fergus [D83G] onto a piece of white cardstock and paint with Golden Interference Blue Fine Acrylic Paint to mimic the GSLC frame used for the font of the card.
12.              In a similar fashion use the embossing powders and techniques you used on previous frame on this one.
13.              Place the text inside the window and glue all pieces sandwiched together and dry completely flat using the pressing tool of your choice.
14.              Send out these greetings to special friends knowing that many will be framing them and adding to the winter or holiday decorations for years to come.




Some final thoughts. It is no secret that I love walks in the woods, a good Robert Frost poem, or a song from my favorite singing group, Over the Rhine.
Their song “Let It Fall” is my wish for you this holiday season:
Have you been trying too hard
Have you been holding too tight
Have you been worrying too much lately
All night
Whatever we've lost
I think we’re gonna let it go
Let it fall
Like snow
‘Cause rain and leaves
And snow and tears and stars
And that’s not all my friend
They all fall with confidence and grace
So let it fall, let it fall
Have you been carin' too much
How this one ends
Y’know it’s not the kind of fight
That you lose or win
When you’re down so low
You feel…
Have you been carin' too much
How this one ends
Y’know it’s not the kind of fight
That you lose or win
When you’re down so low
You feel the imprint of the ground
On skin
Look around
Breathe in
‘Cause rain and leaves
And snow and tears and stars
And that’s not all my friend
They all fall with confidence and grace
So let it fall, let it fall
A treasured memory I have is visiting a dear friend while he was living on an uncle’s farmland home and we walked to the nearby forest in the gentle falling snow and we reached a clearing where we had gone camping earlier in the year. It is circled in mighty pine trees with a fire circle in the center. We built a booming bonfire and stood nearby staring up into the sky as the snowflakes fell and melted onto our warmed faces. A time of rare  peace and beautiful share solitude, in the silence of the snow storm.
Supplies:   Gypsy Soul Laser Cuts Double Window Ornate [D32C],  Gypsy Soul Laser Cuts Stained Glass Frame Fergus [D83G], prepared wooden embossed substrate, (I used Tim Holtz Sizzix Lumber #D Texture Fades Embossing Folder and various acrylic paints),  Golden Interference Blue Fine Acrylic Paint, Embossing Powders Oil Rubbed Bronze, Walnut Stain, Versa Mark Pad, Heating Tool, Images and Text, Weldbond, Metallic Pale Blue Cardstock, Clamps or a Pressing Tool of Your Choosing


I cannot wait to see your interpretation of this project. Share it on the Gypsy Soul Laser Cuts Craft Group Page on Facebook. I would love to see what new creations you are working on!
Top of Form
Custom date range
Fr
Top of Form
Bottom of

 


No comments:

Post a Comment