And here is my finished Black Dragon Treasure Chest I'm on the lookout for some small but really cool feet for it. Until then it will go without feet, but it still looks pretty good, nonetheless.
This was my inspiration piece:
|bottom of chest pieces|
2. Assemble top. Adhere glue to center cut out piece only...
... and lay border and center cut-out rectangular piece on top of solid piece, using the border to help center the cut out rectangular piece.
... and adhere to top, as shown. Set aside to dry.
3. Turn bottom of chest over and add glue.
|Bottom of chest with slightly larger chipboard piece (left)|
Center and glue bottom of chest to slightly larger chipboard piece, as shown. Set aside to dry.
4. Place box top on box to check fit.
Glue chipboard strips around box bottom and top edges, as shown. Remove top to make sure the pieces are tight up against the top edge. Add clips to hold in place, if needed.
5. While bottom is drying, start painting the lid and two dragons with black chalk paint. Paint both sides of the top as well as the two dragons. Set aside to dry.
6. Paint box bottom with the black chalk paint, inside and out. Set aside to dry.
7. Mark the center of two pieces from the Punch Elements Deco set by drawing a pencil line from the points shown in the photo. Punch hole where the "X" crosses and use that as a template to mark the second piece. Paint the two pieces with the black chalk paint, as well as the corresponding circles. Don't punch holes in the circle pieces because they are going to be used behind the elements to level them when we glue them down.
8. Dry brush all pieces with Cascade chalk paint, or any color that looks like a blue patina.
|Remove most of paint from stencil brush onto paper towel |
before dry brushing pieces
9. Glue black lace around top and bottom of the box bottom.
10. Dry brush the lace with Cascade chalk paint, or whatever you used to dry brush your box.
11. Glue a second circle to the painted one. Insert butterfly embroidered fabric brad through deco element and add two brass pieces to each side, as shown.
12. Glue two dragons onto top, as shown. Let pieces dry before handling. A quick grab tacky glue works well at keeping the dragons upright while drying.
13. Add more metal embellishments to the sides and top, as shown.
GSL Treasure Chest
GSL Dragons Shape Set
GSL Punch Elements Deco
Chalk Paint (Black, Cascade)
Butterfly embroidered fabric brad (Paper Studio)
Quick Grab Tacky Glue
Assorted paint brushes
I hope you enjoyed my project today. If you see something online that inspires you, why not give it a try to emulate it, as I have done with this Black Dragon inspired chest. Gypsy Soul Laser Cuts has a huge line of chipboard for you to work with, so go check it out and see what catches your fancy!!!
Thanks so much for stopping by, and always take time to play!